CASES

JMI Multi-use Telescope Carrying Case – 11 Inch OTAs
$681.00

CASEOTA11

Safely transport your telescope with JMI Multi-use Telescope Carrying Case – 11 Inch OTAs. Protects expensive telescope equipment while making it easier to transport from one location to another. Features handles and wheels for ease of lifting and transport.

JMI Multi-use Telescope Carrying Case – 11 Inch OTAs
Safely transport your telescope with JMI Multi-use Telescope Carrying Case – 11 Inch OTAs. Made with heavy-duty ABS plastic, this JMI Carrying Case includes crush-resistant die-cut foam contoured to safely hold telescopes during transport. Protects expensive telescope equipment while making it easier to transport from one location to another. Features handles and wheels for ease of lifting and transport.

This case is for Telescopes Optical Tube Assemblies (OTA) ONLY. Includes two lockable latches, three steel-reinforced handles, a 2″ by 30″ steel hinge and die-cut foam lining for the telescope optical tube. It can be carried by two people using the two handles on either end or pulled using the attached wheels. The diagonal must be detached (from Celestron scopes) and inserted in a foam cutout inside the case. The wheels must be attached to the case by the customer which is easily accomplished in a few seconds with two 7/16″ wrenches. An optional Large-Wheel Upgrade is available but must be installed by JMI at the time of purchase.

Compatible with:

Celestron C-11, C11-SGT, CG-11

Celestron CGE 1100, CGE Pro 1100 HD

Celestron CGEM 1100 HD

Celestron CM-1100

Celestron EdgeHD 11 OTA

Meade LX850 10″ OTA

JMI Multi-use Telescope Carrying Case – Configurable 20 Inch
$329.00

#CASEGEN20

Safely transport your telescope with JMI Multi-use Telescope Carrying Case – Configurable 20 Inch. Protects expensive telescope equipment while making it easier to transport from one location to another. Features handles for ease of lifting and transport.

Safely transport your telescope with JMI Multi-use Telescope Carrying Case – Configurable 20 Inch. Made with heavy-duty ABS plastic, this JMI Carrying Case includes crush-resistant die-cut foam contoured to safely hold telescopes during transport. Protects expensive telescope equipment while making it easier to transport from one location to another. Features retractable handles and wheels for ease of lifting and transport.

Includes foam lining with inside dimensions of 20″ x 11-1/8″ x 9-1/8″ and configurable foam flat spacers and blocks. Glue is provided for permanent placement of the configurable foam pieces to securely hold the scope and other equipment in place. The case includes one steel-reinforced handle, two lockable latches and a 2″ by 20″ steel hinge

The top of this case is not hinged. It must be removed completely to insert or remove the telescope. The case is designed to be maneuvered like a wheelbarrow with the two retractable handle bars and two 10″ pneumatic wheels. Installation of the wheels and support rails is easy and requires two 7/16″ wrenches (or two crescent wrenches). This case is compatible with Peterson ergonomic Get-A-Grip handles.

Compatible with:

Celestron Advanced VX Mount Eq Head

Celestron C8-S, C8-SGT

Celestron CGE 800, G-8

Celestron Great Polaris C8

Celestron NexStar 4 / 4GT / 4i / 4 SE / 5 / 5i / 5 SE / 6 SE

Celestron Super Polaris C8

Meade ETX-90* (non-EC version), ETX-90EC*, ETX-90PE*, ETX-105EC, ETX-105PE, ETX-125EC, ETX-125PE

Meade GEM mounted 2080

Meade LXD55 SC-8, LXD75 SC-8

Other older 8″ SCT Optical Tube Assemblies (check dimensions)

* Pre-2014 versions only. For 2014 and later be sure to check that overall length of entire system, parked at zenith, does not exceed 20″.

News & Info

Downloads

Privacy Policy

News & Info

Home

CONTACT US

Nelson Devices LLC

1979 Chub Lake Rd

Roxboro, NC 27574

919-561-0192

MENU

Support