CUSTOM CABLE ASSEMBLIES FOR MEADE TELESCOPES & ACCESSORIES, TELESCOPE CABLES, TELESCOPE HAND CONTROLLER CABLES & CCD CABLES

2019-02-06_09.50.10sm

Nelson Devices values the quality of our products designed and made for our customers. All our cable assemblies are inspected and tested before packaged and shipped.


Meade LX200 Aftermarket 3' DEC Cable #LX200-DEC-3

Price

$16.50

Brief Description

This cable is a replacement / backup /spare or upgrade cable to your LX200 Classic ECM telescope DEC drive connection cable. Comes in 3' length, flat-wire design for more flexibility with tension boots. Penta-scanner tested!

db_DEC_cable_Boots1

15ft_HBX

Meade 15' Hand Controller Replacement Cable for LX200 RCX400 LX600 LX850 for Autostar II & Autostar III controllers. #MED-HC-15

Price

$12.95

Brief Description

This cable is an aftermarket replacement or upgrade cable to your Meade RCX400, LX200 Classic LX600, LX850 telescope hand controllers, White design for better night visibility and safety from cord wrap. great for upgrade or spare.


db_497_cable-061

Meade Aftermarket 497 Autostar replacement hand .controller cable

Brief Description

Meade 497 Autostar compatible Replacement cable for Autostar is straight and will not pull you back to the telescope like the original coiled cable. reduces stress on the connectors and user. Penta-scanner tested.


db_497_cable-121

Meade After-market LX55/75 ETX Straight Hand controller cable 6’ to 25’ Lengths available


Brief Description

Listed is a hand controller cable for all LX55/75& ETX scopes. straight design UTP Level V data rate. Tested with penta-scanner.


db_12ft_rj12-DB91

Meade #505 Compatible RS232 Serial Cable White for better night visibility & safety from cord wrap. Available from 6’ to 25’ Lengths.

*CUSTOM LENGTHS AVAILABLE*

Brief Description

This 505 Connector Cable Set is 100% compatible to the #07505. This is a PC to AutoStar or AudioStar connector cable only. Allows connection of a Meade 497 AutoStar or Meade AutoStar keypad to a PC serial port using Meade AutoStar Suite software, available for free download at:

www.Meade.com. When used with appropriate software it allows for telescope control from the PC, downloading software updates, and cloning one keypad to another so you can share user created databases. Software not included. New white design is great for better night vision and safety. Recommended for:

All DS Models, All DS2000 Models, All ETX Models ,Star Navigator & NG models, LXD55, LX65, LXD75,  LX80, LX90 and LT models.

Penta-scanner tested.


db_12ft_rj12-DB91

Meade #507 Compatible serial cable for Meade LX200 Classic, LX600, LX850 & GPS/LX400 Telescopes. Available from 6’ to 25’ Lengths.

*CUSTOM LENGTHS AVAILABLE*

Brief Description

The #507 Cable Connector Kit allows connecting your LX200-ACF Autostar II keypad to the serial port on your personal computer/laptop. Also compatible with LX200GPS and LX200 "Classic" (pre-Autostar). Length 6 - 25 feet. Software not included. May also be used with USB adapter (sold separately) to connect to an available USB port on the PC.
Note: serial port interface. USB Adapter not included, available for separate purchase. A Pentium II/400mhz computer is recommended. For Windows XP or 32-bit Vista operating systems. Penta-scanner tested.


db_Nexus-II-Encoders-cableSM3

Meade Magellan I Controller cable assembly. #MGL1-06

Price

$19.95


Brief Description

This cable set if for the Magellan I controller box to feed the drive motors on the LX10, etc. 6' (2M)


IMG_0036

Starlock for LX600 6' 1.8m after market cable #SL-600


Price

$17.95

Brief Description

This is an after market 6' / 1.8m cable assembly for the Meade LX600 Starlock connectivity. Its white design is for better low light  visibility for safety and cord wrap issues. great for backup and spare. fully tested.


db_BLUESTAR_CABLE1

Meade ETX and LX90 telescopes cable  #BSTAR-MeadeLX90-ETX

Price

$12.95

Brief Description

This cable is a 3' replacement or upgrade cable to your Bluestar control box to telescope. model 7313 for Meade ETX and LX90 telescopes. Its straight, No more tangled cords, light colored for better night visibility and safety. Fully tested.

Meade LX200  telescopes cable #BSTAR-MeadeLX200

Price

$12.95

Brief Description

This cable is a 3' replacement or upgrade cable to your Bluestar control box to telescope. Meade LX200 telescopes. Its straight, No more tangled cords, Light colored for night vision and safety.                        Fully tested.


Meade Aftermarket LX200 / LX600 Fork Arm Jumper Single Cable #LX00FA-07

Price

$145.00

Brief Description

This if for (1) after market replacement or backup/spare. Commercial quality  approx. 12" to molded DB9F ends. Fully shielded to prevent unwanted EMI/RFI interference, and fully molded cable design for excellent strain relief

ROHS compliant.

Penta-scanner tested.



Plug to 5.5mm x 2.1mm male Jack DC Power Adapter

 

This is a great way to adapt power suppies, 5.5mm x 2.5mm feMale Plug to 5.5mm x 2.1mm male Jack DC Power Adapter
Qty: 1

5.5x2.5F-5.5x2.1M
db_Cable11

Meade #607 replacement DC power cable #MED-607-5

Price

$10.95

Brief Description

Listed ia a DC power cable  approx 5'
fused and LED also has ferite coil on it. Works with Meade ETX90, ETX-125, LXD-75, LS and LT models, LX90 models, LX200GPS and ACF models up to 14" diameter, all RCX/LX400 models, LX600, LX850, and other models which have a 12V "phono" type power input jack.
Note: not compatible with DS-2000 series telescopes, 18 volt LX200 "Classic models, or 16" LX200 which require 18 volts.


db_90oAdapter1

Right 90 Degree Power Adapter Terminal for Meade LX200-GPS, LX200 Classic, LX90, LXD55, ETX, with 5.5mm feed plug #5.55TERM

Price

$5.95

Brief Description

This 90 degree adapter terminal plug has a right angle male 5.5mm connector , The right angle connector won't interfere with the fork arms as they rotate over the front panel, and won't pull out accidentally. A must-have for the LX200-GPS 14". This is for the unterminated connector only.


db_IOcable1

Meade LX200 Classic I/O Ribbbon Cable Assembly LX200-RB-I/O

Price

$16.95

Brief Description

This cable is for the connectivity from the mother board to the main power board on the fork mount.

db_For-CCTV-Camera-DC-Power-Plug-Cable-5-5-x-2-5mm-Male-90-Degree-Right_jpg_640x6401

Right 90 Degree Angle Power Adapter for Meade LX200-GPS, LX200 Classic, LX90, LXD55, ETX, with 5.5mm feed plug! #90 degree.    #PWRADPT-5.5

Price

$8.95

Brief Description

This 6" adapter has a right angle male 5.5/5.5mm connector on  90 degree end, and 5.5mm female on the other end, and goes on the end of a  5.5mm power supply cable. The right angle connector won't interfere with the fork arms as they rotate over the front panel, and won't pull out accidentally. A must-have for the LX200-GPS 14

Meade #507 Compatible Serial Adapter for Meade LX200 Classic & GPS/LX400 Telescopes

$9.95  #507ADPT

The #507 Cable Connector Adapter only. This allow you to connect your LX200-ACF Autostar II keypad to the serial port on your personal computer/laptop. Also compatible with LX200GPS and LX200 "Classic" (pre-Autostar). Length is 25 feet. Software not included. May also be used with USB adapter (sold separately) to connect to an available USB port on the PC.
Note: serial port interface. USB Adapter not included, available for separate purchase. A Pentium II/400mhz computer is recommended. For Windows XP or 32-bit Vista operating systems.

db_rj45-db9-adapter-LRG1

Meade #505 Compatible RS232 Serial Adapter

$9.95  #505ADPT

This 505 Connector Adapter is 100% compatible to the #07505. This is a PC to AutoStar or AudioStar connector cable only. Allows connection of a Meade 497 AutoStar or Meade AutoStar keypad to a PC serial port using Meade AutoStar Suite software, available for free download at:
www.Meade.com. When used with appropriate software it allows for telescope control from the PC, downloading software updates, and cloning one keypad to another so you can share user created databases. Software not included. New white design is great for better night vision and safety. Recommended for: All DS Models All DS2000 Models All ETX Models All LX80, 90 and all other models,


paypal-verified_copy
paypal_logo

Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc.   If you have any questions, please contact us


IMG_0402

Meade Hand Controller Replacement Cable for the Meade Autostar II hand controller. #ASII-HBX-XX

Price

$15.95  - $21.95

Brief Description

This cable is an after market replacement or upgrade cable to your Meade  Autostar II hand controller.  White design for better night visibility and safety from cord wrap. great for upgrade or spare.



single1
set1

Meade Aftermarket LX200 / LX600 Fork Arm Jumper Cable Set

 #LX00FA-08

Price

$275.00

Brief Description

(1) after market replacement set for remlacement,  backup/spare. Fork Arm cable set. These are commercial quality approx. 12" molded DB9F ends. Fully shielded to prevent unwanted EMI/RFI interference, and fully molded cable design for excellent strain relief.  ROHS compliant.

Penta-scanner tested.

IMG_0036

Starlock for LX850 6' 1.8m after market cable #SL-850


Price

$17.95

Brief Description

This is an after market 6' / 1.8m cable assembly for the Meade LX850 Starlock connectivity. Its white design is for better low light  visibility for safety and cord wrap issues. great for backup and spare. fully tested.


monumentvalley_logo_ND1