CABLE ASSEMBLIES FOR MEADE LX10 TELESCOPES & ACCESSORIES, TELESCOPE CABLES, TELESCOPE HAND CONTROLLER CABLES & CCD CABLES

2019-02-06_09.50.10sm

Nelson Devices values the quality of our products designed and made for our customers. All our cable assemblies are inspected and tested before packaged and shipped.

Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc.   If you have any questions, please contact us

scope
meade-lx10-mag

Meade Magellan I Controller cable assembly. #MGL1-06

Price

$19.95


Brief Description

This cable set if for the Magellan I controller box to feed the drive motors on the LX10, etc. 6' (2M)

db_Nexus-II-Encoders-cableSM3

Meade LX10 Aftermarket 3' DEC Cable #LX10-DEC-3

Price

$16.50

Brief Description

This cable is a replacement / backup /spare or upgrade cable to your LX10  telescope DEC drive connection cable. Comes in 3' length, flat-wire design for more flexibility with tension boots. Penta-scanner tested!

db_DEC_cable_Boots1
MAIN-BOARD

Meade LX10 Main PCB

$58.00

This is a direct replacement for the original Meade LX10 front panel printed circuit board, with all connectors and RA tracking motor control functionality. It contains all new components and features a new control circuit designed to reduce temperature variation in tracking speed.

Easy installation.
Adjustable tracking speed: to be tuned to your specific telescope.
Feedback control of motor voltage improves tracking performance over time and temperature.
Temperature drift of motor voltage only 1.5% that of the original board (67X better). See below for details.
Recommended for 12VDC or 9V Battery use.

Additional Information


A PDF Product Data Sheet is available here: LX10 Front Panel PCB Data Sheet

The LX10 Main PCB is a direct replacement for the original Meade board, and requires no special tools to install.

The design uses closed-loop control to better maintain a constant drive speed over load variations, time and temperature. It includes a multi-turn potentiometer to trim output voltage to match the telescope's individual motor and drivetrain, and does require adjustment by the user after installation.

Temperature control testing: both boards were tested for voltage drift over a 30 degree ambient temperature variation while driving motor at 25 mA current.

Drift, original board: -0.087V
Drift, new board: +0.0013V
Note that, although the board will work with any voltage higher than 5.3V, powering this board using 4 AA batteries (6V) is not recommended, as the batteries will gradually drain down to below 5.3V.

 

buttonSM_blank
buttonSM_blank
buttonSM_blank
buttonSM_blank

CONTACT US

Nelson Devices LLC

1979 Chub Lake Rd

Roxboro, NC 27574

919-561-0192

paypal-verified_copy
paypal_logo
Facebook_icon_2013SM.svg
linkedin_logoSM

©2022 NelsonDevices, LLC. All Rights Reserved.

twitter-logo-png-twitterbird-twitter-png-logo-1528
instagram-logo
ABOUT
set
monumentvalley_logo_ND1