CABLE ASSEMBLIES FOR MEADE LX200 GPS TELESCOPES & ACCESSORIES, TELESCOPE CABLES, TELESCOPE HAND CONTROLLER CABLES & CCD CABLES
Nelson Devices values the quality of our products designed and made for our customers. All our cable assemblies are inspected and tested before packaged and shipped.
Meade 15' Hand Controller Replacement Cable for LX200 RCX400 LX600 LX850 for Autostar II & Autostar III controllers. #MED-HC-15
Price
$12.95
Brief Description
This cable is an aftermarket replacement or upgrade cable to your Meade RCX400, LX200 Classic LX600, LX850 telescope hand controllers, White design for better night visibility and safety from cord wrap. great for upgrade or spare.
Meade #507 Compatible serial cable for Meade LX200 Classic, LX600, LX850 & GPS/LX400 Telescopes. Available from 6’ to 25’ Lengths.
*CUSTOM LENGTHS AVAILABLE*
Brief Description
The #507 Cable Connector Kit allows connecting your LX200-ACF Autostar II keypad to the serial port on your personal computer/laptop. Also compatible with LX200GPS and LX200 "Classic" (pre-Autostar). Length 6 - 25 feet. Software not included. May also be used with USB adapter (sold separately) to connect to an available USB port on the PC.
Note: serial port interface. USB Adapter not included, available for separate purchase. A Pentium II/400mhz computer is recommended. For Windows XP or 32-bit Vista operating systems. Penta-scanner tested.
Meade #507 Compatible Serial Adapter for Meade LX200 Classic & GPS/LX400 Telescopes
$9.95 #507ADPT
The #507 Cable Connector Adapter only. This allow you to connect your LX200-ACF Autostar II keypad to the serial port on your personal computer/laptop. Also compatible with LX200GPS and LX200 "Classic" (pre-Autostar). Length is 25 feet. Software not included. May also be used with USB adapter (sold separately) to connect to an available USB port on the PC.
Note: serial port interface. USB Adapter not included, available for separate purchase. A Pentium II/400mhz computer is recommended. For Windows XP or 32-bit Vista operating systems.
Meade LX200 telescopes cable #BSTAR-MeadeLX200
Price
$12.95
Brief Description
This cable is a 3' replacement or upgrade cable to your Bluestar control box to telescope. Meade LX200 telescopes. Its straight, No more tangled cords, Light colored for night vision and safety. Fully tested.
Plug to 5.5mm x 2.1mm male Jack DC Power Adapter
This is a great way to adapt power suppies, 5.5mm x 2.5mm feMale Plug to 5.5mm x 2.1mm male Jack DC Power Adapter
Qty: 1
Meade #607 replacement DC power cable #MED-607-5
Price
$10.95
Brief Description
Listed ia a DC power cable approx 5'
fused and LED also has ferite coil on it. Works with Meade ETX90, ETX-125, LXD-75, LS and LT models, LX90 models, LX200GPS and ACF models up to 14" diameter, all RCX/LX400 models, LX600, LX850, and other models which have a 12V "phono" type power input jack.
Note: not compatible with DS-2000 series telescopes, 18 volt LX200 "Classic models, or 16" LX200 which require 18 volts.
Right 90 Degree Power Adapter Terminal for Meade LX200-GPS, LX200 Classic, LX90, LXD55, ETX, with 5.5mm feed plug #5.55TERM
Price
$5.95
Brief Description
This 90 degree adapter terminal plug has a right angle male 5.5mm connector , The right angle connector won't interfere with the fork arms as they rotate over the front panel, and won't pull out accidentally. A must-have for the LX200-GPS 14". This is for the unterminated connector only.
Right 90 Degree Angle Power Adapter for Meade LX200-GPS, LX200 Classic, LX90, LXD55, ETX, with 5.5mm feed plug! #90 degree. #PWRADPT-5.5
Price
$8.95
Brief Description
This 6" adapter has a right angle male 5.5/5.5mm connector on 90 degree end, and 5.5mm female on the other end, and goes on the end of a 5.5mm power supply cable. The right angle connector won't interfere with the fork arms as they rotate over the front panel, and won't pull out accidentally. A must-have for the LX200-GPS 14
Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc. If you have any questions, please contact us
USB 2.0 TO RS 232 CONVERTER
#20-232
Price
$12.95
Brief Description
USB 2.0 TO RS 232 INTERFACE CONVERTER. Comes w/ cable and driver software, Supports RS23 serial interface (DB9. OVER Mbps dataxfer rates, remote wake-up and power management or DB9). supports Win 98./XP/7/8/10, Mac os v8.6 or higher.
Power cable for all meade LX200 GPS scopes and others
2 sizes to choose from. (Custom Lengths are availble with larger gauges)
#90D-PWR-CA-XX
Brief Descp:
Power cable for all meade LX200-GPS scopes and others that except the 5.5mm / 2.5mm DC connector w/ center (+). These cables are white in design for dark sites & low light for safety and visibility from cord wrap, etc.
Celestron power tank cable for all Meade LX200 scopes (12V) and others
2 sizes to choose from. (Custom Lengths are available with larger gauges)
#CEL-PT-MEADE-XX
Brief Descp:
This power cable is designed for the Meade telescopes (12v) systems to use with the Celestron power tanks. Works for all Meade ETX scopes (12v) and others that except the 5.5mm / 2.5mm DC connector w/ center (+). Has Farite Coil, 90° plug head for strain relief and low profile panel interface. These cables are white in design for dark sites & low light for safety and visibility from cord wrap, etc.
©2020 NelsonDevices, LLC. All Rights Reserved.