LX200buttons_high-resSM-Frame

CABLE ASSEMBLIES FOR MEADE LX200-R TELESCOPES & ACCESSORIES, TELESCOPE CABLES, TELESCOPE HAND CONTROLLER CABLES & CCD CABLES


2019-02-06_09.50.10sm

Nelson Devices values the quality of our products designed and made for our customers. All our cable assemblies are inspected and tested before packaged and shipped.


These button pads are one of the best keypad upgrades for the LX200 hand controllers to date! All to make your night time observing plesure better. You can raise 1 or all 20 buttons on the LX200 keypad.


292167-12
front
db_DEC_cable_Boots1

Meade LX200 Aftermarket 3' DEC Cable #LX200-DEC-3

Price

$16.50

Brief Description

This cable is a replacement / backup /spare or upgrade cable to your LX200 Classic ECM telescope DEC drive connection cable. Comes in 3' length, flat-wire design for more flexibility with tension boots. Penta-scanner tested!

15ft_HBX

Meade 15' Hand Controller Replacement Cable for LX200 RCX400 LX600 LX850 for Autostar II & Autostar III controllers. #MED-HC-15

Price

$12.95

Brief Description

This cable is an aftermarket replacement or upgrade cable to your Meade RCX400, LX200 Classic LX600, LX850 telescope hand controllers, White design for better night visibility and safety from cord wrap. great for upgrade or spare.


db_12ft_rj12-DB91

Meade #507 Compatible serial cable for Meade LX200 Classic, LX600, LX850 & GPS/LX400 Telescopes. Available from 6’ to 25’ Lengths.

*CUSTOM LENGTHS AVAILABLE*

Brief Description

The #507 Cable Connector Kit allows connecting your LX200-ACF Autostar II keypad to the serial port on your personal computer/laptop. Also compatible with LX200GPS and LX200 "Classic" (pre-Autostar). Length 6 - 25 feet. Software not included. May also be used with USB adapter (sold separately) to connect to an available USB port on the PC.
Note: serial port interface. USB Adapter not included, available for separate purchase. A Pentium II/400mhz computer is recommended. For Windows XP or 32-bit Vista operating systems. Penta-scanner tested.

Meade #507 Compatible Serial Adapter for Meade LX200 Classic & GPS/LX400 Telescopes

$9.95  #507ADPT

The #507 Cable Connector Adapter only. This allow you to connect your LX200-ACF Autostar II keypad to the serial port on your personal computer/laptop. Also compatible with LX200GPS and LX200 "Classic" (pre-Autostar). Length is 25 feet. Software not included. May also be used with USB adapter (sold separately) to connect to an available USB port on the PC.
Note: serial port interface. USB Adapter not included, available for separate purchase. A Pentium II/400mhz computer is recommended. For Windows XP or 32-bit Vista operating systems.

db_rj45-db9-adapter-LRG1



db_BLUESTAR_CABLE1

Meade LX200  telescopes cable #BSTAR-MeadeLX200

Price

$12.95

Brief Description

This cable is a 3' replacement or upgrade cable to your Bluestar control box to telescope. Meade LX200 telescopes. Its straight, No more tangled cords, Light colored for night vision and safety.                        Fully tested.

db_Cable11

Meade #607 replacement DC power cable #MED-607-5

Price

$10.95

Brief Description

Listed ia a DC power cable  approx 5'
fused and LED also has ferite coil on it. Works with Meade ETX90, ETX-125, LXD-75, LS and LT models, LX90 models, LX200GPS and ACF models up to 14" diameter, all RCX/LX400 models, LX600, LX850, and other models which have a 12V "phono" type power input jack.
Note: not compatible with DS-2000 series telescopes, 18 volt LX200 "Classic models, or 16" LX200 which require 18 volts.

5.5x2.5F-5.5x2.1M

Plug to 5.5mm x 2.1mm male Jack DC Power Adapter

 

This is a great way to adapt power suppies, 5.5mm x 2.5mm feMale Plug to 5.5mm x 2.1mm male Jack DC Power Adapter
Qty: 1

db_90oAdapter1

Right 90 Degree Power Adapter Terminal for Meade LX200-GPS, LX200 Classic, LX90, LXD55, ETX, with 5.5mm feed plug #5.55TERM

Price

$5.95

Brief Description

This 90 degree adapter terminal plug has a right angle male 5.5mm connector , The right angle connector won't interfere with the fork arms as they rotate over the front panel, and won't pull out accidentally. A must-have for the LX200-GPS 14". This is for the unterminated connector only.

db_For-CCTV-Camera-DC-Power-Plug-Cable-5-5-x-2-5mm-Male-90-Degree-Right_jpg_640x6401

Right 90 Degree Angle Power Adapter for Meade LX200-GPS, LX200 Classic, LX90, LXD55, ETX, with 5.5mm feed plug! #90 degree.    #PWRADPT-5.5

Price

$8.95

Brief Description

This 6" adapter has a right angle male 5.5/5.5mm connector on  90 degree end, and 5.5mm female on the other end, and goes on the end of a  5.5mm power supply cable. The right angle connector won't interfere with the fork arms as they rotate over the front panel, and won't pull out accidentally. A must-have for the LX200-GPS 14

db_IOcable1

Meade LX200 Classic I/O Ribbbon Cable Assembly LX200-RB-I/O

Price

$16.95

Brief Description

This cable is for the connectivity from the mother board to the main power board on the fork mount.

paypal-verified_copy
paypal_logo

Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc.   If you have any questions, please contact us








AUX_PORT_FAN_CABLE

Meade LX200 Classic After market power cable for cooling fans. LX200C-FAN

Price

$19.95

Brief Description

This cable assembly is 24” RJ45 AUX port connection to 5.5mm power plug to fans. cable is white color for better low light night vision, safety from snags and cord wrap.




IMG_1071

USB 2.0 TO RS 232 CONVERTER

#20-232

Price

$12.95

Brief Description

USB 2.0 TO RS 232 INTERFACE CONVERTER. Comes w/ cable and driver software, Supports RS23 serial interface (DB9. OVER Mbps dataxfer rates, remote wake-up  and power management or DB9). supports Win 98./XP/7/8/10, Mac os v8.6 or higher.


90_PWR-Ca-06s

Power cable for all meade LX200 Classic scopes and others

2 sizes to choose from. (Custom Lengths are availble with larger gauges)

#90D-PWR-CA-XX

Brief Descp:

Power cable for all meade LX200-R scopes and others that except the 5.5mm / 2.5mm DC connector w/ center (+). These cables are white in design for dark sites & low light for safety and visibility from cord wrap, etc.

Facebook_icon_2013SM.svg
linkedin_logoSM

ABOUT NELSON DEVICES

Nelson Devices is a web based company founded by Kendall Nelson, RCDD, SAA to NASA/JPL,  With a love for  Astronomy since 8 years young! 100% Veteran own bussiness, Offering a wide varity of cool gadgets and time saving devices patented by him such as the Telescope quick connect system, Slow-mo genie,  adapters, custom and aftermarket cable assemblies that somtines gets damaged, woreout or lost over time.

©2020 NelsonDevices, LLC. All Rights Reserved.

CONTACT US

Nelson Devices LLC.             Chub Lake Rd                     Roxboro, NC 27574             919561-0192                          Help.NelsonDevices@gmail.com


monumentvalley_logo_ND1
twitter-logo-png-twitterbird-twitter-png-logo-1528
instagram-logo