EQUIPMENT & CUSTOM OPTICAL CABLE ASSEMBLIES FOR PERSONAL & COMMERCIAL OBSERVATORIES

Offering copper & fiber optic cable solutions to connect observatories via ethernet networks for 10/100 data support & electronics media converters, etc. extended keypad observatory connectivity.

2019-02-06_09.50.10sm

We  value the quality of our products designed and made for our customers. All our copper and light-guide cable are inspected & tested before packaged and shipped.

Nelson Devices now offers a wide variety of copper and Fiber Optic cable solutions for broadband connectivity to your new or upgrading your existing observatory. All of our Fiber & Copper Cable Assemblies up to 100 FT (30m) are tested before packing. If you do not see your product listed herein, please let us know. We also can custom make cables over 100 FT if your application requires it, Anything up to 15.5 Miles or 25KM

Other applications includes serial and hand controller extension cables.

20190430_164343SM

This is one of the best solution for observatory data connectivity over copper and marginal wireless applications. no worries about  lighting strikes or surge run in.

 

Features:
 

High Quality, 1 years quality guarantee

An RJ45 ports and a single-fiber SC optical port , to achieve optical signal conversion between 10/100base TX twisted pair

 (Ethernet )and 100base FX (fiber optic) 

Core optical fiber can be completed in just one way signal transmission compared to dual fiber optic data transmission

 mode to improve the quantity doubled 

Compliance with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX, 100Base-FX standards 

Has 10M/100M adaptive capacity 

Ethernet interface can adaptively direct line/ crossover cable connection 

Support full/ half duplex mode 

Support IEEE802.3X duplex flow control and half-duplex backpressure flow control 

Supports broadcast storm prevention function

1916 Byte support large data frame ( optional )
Built- in lightning protection circuit , which can greatly reduce the damage caused by lightning induction
UTP up to 100 meters, longest 100 km single-mode fiber
 

There are six LED indicators : Power, TX 100, TX Link/ Act, FX 100, FX Link/ Act, FDX/ Col; easy to monitor the working

 status of the transceiver and determine the cause of the fault

Specification:
 

Follow the IEEE 802.3, IEEE 802.3u and 100Base-FX standards

10/100Mbps data transfer rate

Support full-duplex and half-duplex way of working

Provides a standard RJ45 interface and SC fiber interface

RJ45 interface supports both 10Mbps and 100Mbps auto-negotiation function

RJ45 interface with fast switch function

EMI Certification: CE, FCC, VCCI, C-Tick
 


Fiber Type Singlemode

SC fiber optic interface type

Wavelength 1310nm 1550nm

Transmission distance 25Km

Maximum transmit optical power -12.0 dBm

Minimum emission power -19.0 dBm

Sensitivity -34.0 dBm

15.0 dBm optical fiber link loss

Power: AC100 ~ 265V/ DC5V
 

Working temperature : 0 ~ 50 degree

Storage temperature : - 40 ~ 70 degree
Dimension: 95mm X  71mm X  25mm

Packing list:

1 Pair Optical Fiber Converters
2  Power Adapters

single_mode_SC
cat5e_special
cat5e-ethernet-100ftSM

These fiber cables are pre-ended and tested. make sure your conduit is large enough for the installation of your new fiber cable! Typically .75 in pipe will be fine

Specs:

 Fiber Mode: Single mode 9/125

Connector: SC - SC
Cable le ngth: 30M (100ft)
Wavelength: 1310nm - 1550nm
Cable color: Yellow
 

Cable material: PVC

Durability: 1000 times 

Suitable for networking use, not suggest use on telecom/ broadcas

These cable range in stock: 10m 15m 30m lengiths. Please contact us for custom lengths up to 25k

HIGH QUALITY TRANSMITTION CABLES

Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is  specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc.   If you have any questions, please contact us


db_single_mode_SC1

3M/10FT SC to SC Fiber Optic Patch Cable Single Mode 9/125 Jumper Cord Network #ND-FOXX-M


Specs:
Fiber Mode: Single mode 9/125
Connector: SC - SC
Cable length: 3M (10ft)
Wavelength: 1310nm - 1550nm
Cable color: Yellow
Cable material: PVC
Durability: 1000 times
Suitable for networking use, not suggest use on telecom/ broadcast-end2

Lengths
db_20190430_164343SM1

1 Pair 25KM Optical Fiber Media Converter Single Mode SC 10/100M Single Fiber GT #MEDIA-FO-PR

45.00

Optical wavelength: 1310nm for A &1550nm for B
Brand: Unbranded
Connector Type: SC/APC
MPN: Does not apply
Speed: 10/100Mbps
Model: HTB-3100AB
RJ45 Port: 1 RJ45 Port
Country/Region of Manufacture:China
Power Supply type: External power supply
Transmission distance: 25KM
Chipset: IC Plus 175
Fiber Mode type: Single
Shell material: Metal Case-End1

db_cat5e-ethernet10ft

CAT5e UTP PVC data patch cable #CT5E-XX



Yellow | 24 AWG Pure Copper Conductor | 350 MHz | PoE | UL Listed | RoHS end

 

Lengths
buttonSM_blank
buttonSM_blank
buttonSM_blank
buttonSM_blank
R

CONTACT US

Nelson Devices LLC

1979 Chub Lake Rd

Roxboro, NC 27574

919-561-0192

paypal-verified_copy
paypal_logo
Facebook_icon_2013SM.svg
linkedin_logoSM

©2022 NelsonDevices, LLC. All Rights Reserved.

twitter-logo-png-twitterbird-twitter-png-logo-1528
instagram-logo
ABOUT
set
monumentvalley_logo_ND1