Name

Optec Atermarket Control Cable for TCF-S & IFW 12' (6m) #OPTC-TCF-CNTL-12

Price

$21.95

Brief Description

This is a cable assembly for TCF-S & IFW devices. The control cable is comprised of an eight wire (four twisted pair) cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the TCF-S or IFW control box. The sub-D connector is connected to the mating DB-9 connector on the TCF-S motor housing or IFW filter wheel. Fully penta scanner tested.

Add to Cart

Buy

Name

TCF-S & IFW 25' (8m) #OPTC-TCF-CNTL-25

Price

$28.95

Brief Description

This is a cable assembly for TCF-S & IFW devices. The control cable is comprised of an eight wire (four twisted pair) cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the TCF-S or IFW control box. The sub-D connector is connected to the mating DB-9 connector on the TCF-S motor housing or IFW filter wheel. Fully penta scanner tested.

Add to Cart

Buy

Name

TCF-S & IFW 50' (16m) #OPTC-TCF-CNTL-50

Price

$28.95

Brief Description

This is a cable assembly for TCF-S & IFW devices. The control cable is comprised of an eight wire (four twisted pair) cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the TCF-S or IFW control box. The sub-D connector is connected to the mating DB-9 connector on the TCF-S motor housing or IFW filter wheel. Fully penta scanner tested.

Add to Cart

Buy

Name

Null Modem / Serial Cable 6' (3m) #NMSC06

Price

$9.95

Brief Description

Note: The SSP photometer line and Perseus 4-port Instrument Selector each use a standard DB9 connector with standard RX, TX, and GND ports connected.  A "Null Modem" serial cable is required to make the connection to a PC's 9-pin DB9 serial port.  Available in lengths from 6-ft (2m) to 25-ft (8m) these serial cables feature a female DB9 connector on both end with locking thumbscrews.

Add to Cart

Buy

Name

Null Modem / Serial Cable 12' (6m) #NMSC12

Price

$13.95

Brief Description

Note: The SSP photometer line and Perseus 4-port Instrument Selector each use a standard DB9 connector with standard RX, TX, and GND ports connected.  A "Null Modem" serial cable is required to make the connection to a PC's 9-pin DB9 serial port.  Available in lengths from 6-ft (2m) to 25-ft (8m) these serial cables feature a female DB9 connector on both end with locking thumbscrews.

Add to Cart

Buy

Name

Null Modem / Serial Cable 25' (8m) #NMSC25

Price

$18.95

Brief Description

Note: The SSP photometer line and Perseus 4-port Instrument Selector each use a standard DB9 connector with standard RX, TX, and GND ports connected.  A "Null Modem" serial cable is required to make the connection to a PC's 9-pin DB9 serial port.  Available in lengths from 6-ft (2m) to 25-ft (8m) these serial cables feature a female DB9 connector on both end with locking thumbscrews.

Add to Cart

Buy