CUSTOM CABLE ASSEMBLIES FOR SKYFI INTERFACE UNITS
SkyFi
Nelson Devices values the quality of our products designed and made for our customers. All our cable assemblies are inspected & tested before packaged and shipped.
The Meade Kits are each (1) 3'(1M) cable and (1) DB9 adapter. This kits are for connecting SkyFi, SkyWire, or a Windows or Mac computer, to Meade/Celestron/Orion/SkyWatcher, telescopes, as well as StellarCat, AroNavis, Losmandy & Starmaster mounts. Please make sure you indicate the correct telescope cable option in your reply. These cables are straight design, no tangles to snag. Autostar Nexstar
If you have any questions on other models or setups please let us know (Click Here)
IMPORTANT: Do not connect SkyFi to the AUX port, handbox port, autoguider port, or any other port on your telescope (or its hand controller) than its RS-232 serial port. Doing so may damage SkyFi and/or your telescope hardware. Make sure you know where the RS-232 serial port on your telescope is located, and only connect SkyFi to that port.
Disclaimer: We are not responsible for damage or repairs required as a consequence of misuse or applications other than the intended use of this product. This includes damage due to improper connectivity of any electronic equipment other than what is specified. Please verify all your connection requirements, safety measures, polarity, hot plugging, etc. If you have any questions, please contact us
SkiFi Adapter/replecement cable adapt to the SkiFi 3 interface. Cable has straight wire design for less coil tangles. 3' (1M)
$19.95
Please select your model below:
SkyFi Interface replacement cable for Nexstar #SKYFI-CA-CEL-3
$13.95
Brief Description
Listed is a 3' SkyFi replacement or upgrade cable for the Celestron Nexstar controllers. For CGE, CPC, SLT and SE Telescoeps. Its straight, No more tangled cords, light colored for night vision and safety.
SkyFi Interface replacement cable for Nexstar #SKYFI-CA-MEAD-3
$13.95
Brief Description
Listed is a 3' SkyFi replacement or upgrade cable for the Meade Autostar controllers. For ETX/LXD55/75 & LX90 Telescoeps. Its straight, No more tangled cords, light colored for night vision and safety.
SKi Fi 3’ Straight Design cable for direct interface from the Ski-Fi unit to the LX200 RS232 port bypassing DB9s. White design for better low light visibility and safety from cord wrap, etc.
SF-LX03
$17.95
CONTACT US
Nelson Devices LLC
1979 Chub Lake Rd
Roxboro, NC 27574
919-561-0192
©2022 NelsonDevices, LLC. All Rights Reserved.
