Features:
High Quality, 1 years quality guarantee
An RJ45 ports and a single-fiber SC optical port , to achieve optical signal conversion between 10/100base TX twisted pair
(Ethernet )and 100base FX (fiber optic)
Core optical fiber can be completed in just one way signal transmission compared to dual fiber optic data transmission
mode to improve the quantity doubled
Compliance with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX, 100Base-FX standards
Has 10M/100M adaptive capacity
Ethernet interface can adaptively direct line/ crossover cable connection
Support full/ half duplex mode
Support IEEE802.3X duplex flow control and half-duplex backpressure flow control
Supports broadcast storm prevention function
1916 Byte support large data frame ( optional ) Built- in lightning protection circuit , which can greatly reduce the damage caused by lightning induction UTP up to 100 meters, longest 100 km single-mode fiber
There are six LED indicators : Power, TX 100, TX Link/ Act, FX 100, FX Link/ Act, FDX/ Col; easy to monitor the working
status of the transceiver and determine the cause of the fault
Specification:
Follow the IEEE 802.3, IEEE 802.3u and 100Base-FX standards
10/100Mbps data transfer rate
Support full-duplex and half-duplex way of working
Provides a standard RJ45 interface and SC fiber interface
RJ45 interface supports both 10Mbps and 100Mbps auto-negotiation function
RJ45 interface with fast switch function
EMI Certification: CE, FCC, VCCI, C-Tick
Fiber Type Singlemode
SC fiber optic interface type
Wavelength 1310nm 1550nm
Transmission distance 25Km
Maximum transmit optical power -12.0 dBm
Minimum emission power -19.0 dBm
Sensitivity -34.0 dBm
15.0 dBm optical fiber link loss
Power: AC100 ~ 265V/ DC5V
Working temperature : 0 ~ 50 degree
Storage temperature : - 40 ~ 70 degree Dimension: 95mm X 71mm X 25mm
Packing list: 1 Pair Optical Fiber Converters 2 Power Adapters
|